Residential · Salt Lake City, UT
Stucco water damage rarely stays cosmetic, it spreads behind the wall, softens sheathing, and stains interior drywall. Serving Salt Lake City since 2019, Superior Stucco Salt Lake City repairs the source, rebuilds the stucco system, and restores a clean, matching finish.
We start with containment and investigation, not guesswork. After protecting landscaping and windows, we map moisture with a pin meter and inspect flashing, kick-out diverters, roof-to-wall transitions, window perimeters, hose bibs, and deck ledgers. Damaged stucco is cut back to solid material, typically at least 6-12 inches past visible staining, then we remove compromised WRB, rusted corner bead, and wet insulation as needed. Repairs rebuild the base correctly with two-layer Grade D building paper or an equivalent WRB, proper shingle-lap, galvanized weep screed at the base, self-adhered flashing at openings, and corrosion-resistant metal lath fastened into studs before a new scratch and brown coat go on.
Salt Lake City homes see strong sun, hard freeze-thaw cycles, wind-driven rain, and irrigation splashback, all of which can push small water entry points into bigger stucco water damage. We address common local failure points like missing kick-out flashing at roof edges, reversed paper laps, caulk-only window installs, and stucco that bridges onto concrete flatwork with no weep path. After the base is restored, we match the existing texture and sheen with the right finish, acrylic finish coat, traditional cement plaster, or an elastomeric coating when appropriate. Control joints, expansion gaps, and sealant joints are rebuilt so the wall can move without cracking and wicking water.
Customers choose us because we treat stucco water damage as a building-envelope problem, not just a patch. Our crews document what we find, explain options, and price repairs based on what is actually opened up, not a vague allowance. You get code-aware details like correctly placed weep screeds, proper lath overlap, and flashing that routes water out, not behind the system. We are licensed and insured, show up when scheduled, and keep the jobsite clean with daily pickup and safe ladder and scaffold practices.
Before we wrap, we do a final walkthrough and confirm drainage and sealant details at the repaired areas. You receive a clear scope of work, repair photos, and maintenance guidance for caulk joints, sprinklers, and grading so the same conditions do not recreate the damage. Expect durable materials, careful curing time for cement-based coats, and a finish blend that looks right in normal daylight, not just up close. If additional hidden deterioration is discovered after demolition, we stop and review it with you before proceeding so there are no surprises.
Yes. We provide a free written estimate that outlines the recommended repair or installation method, finish, and timeline.
Yes. When damage extends past the finish, we can open the area, replace compromised sheathing or framing as needed, then rebuild the stucco or EIFS layers to spec.
We texture-match and color-match as closely as possible, but exact matches can be limited by sun fade and existing coatings. For highly visible areas, we may recommend blending a larger section or recoating an entire elevation.
Cure time depends on the system, thickness, and weather. Cement-based coats need time between lifts, and finish timing is planned around temperature and moisture so the surface hardens correctly.
Yes. We handle commercial, multi-family, and HOA stucco scopes, including phased repairs, consistent texture matching across elevations, and clear documentation for property managers.
Stucco water damage often starts at one detail, a missing kick-out flashing, a failed window seal, or a low stucco edge that wicks water from concrete. Once moisture gets behind the cement plaster, it can soak the WRB and sheathing, rust metal lath and fasteners, and lead to soft framing or interior staining. Proper repair means finding the entry point, rebuilding the drainage plane, and restoring the finish so the wall sheds water again.
A lasting stucco water damage repair usually includes selective demolition, drying time, and reconstruction of the full stucco assembly. We typically rebuild the weather-resistive barrier, install self-adhered flashing at windows and penetrations, and make sure weep screeds and clear termination gaps are in place so water can exit. Where movement caused cracking, we correct control joints and replace failed sealant joints with exterior-grade polyurethane or silicone sealant in properly tooled joints.
Because every wall is different, we tailor repairs to the existing system, traditional three-coat cement plaster over metal lath, or stucco over foam trim and accessory pieces. We also address contributing conditions like sprinkler overspray, negative slope at hardscape, and roof-to-wall flashing errors so the next storm does not send water behind the finish.
If you suspect bubbling paint, dark staining, spalling, efflorescence, or soft spots around windows, schedule an inspection before the damage spreads. Superior Stucco Salt Lake City provides a free written estimate, straightforward recommendations, and workmanship focused on correct drainage and durable finishes.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Salt Lake City. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
